2-WC & 2-Shower Modular Sanitary Container – SC205
SC205 is a compact combined modular sanitary container manufactured by Prefabex for projects that require both toilet and shower facilities within one small building.
The illustrated configuration measures approximately 4.00 × 2.40 m and includes two private WC cubicles, two private shower cubicles and two shared washbasins.
By combining toilet and shower functions within one compact unit, SC205 provides a practical sanitary solution for construction sites, workforce accommodation, staff facilities and remote project locations where available space is limited.
SC205 is part of the Sanitary Containers range by Prefabex, developed for workforce accommodation, construction compounds and remote project facilities.
OFFER REQUEST FROM
(Sanitary Container – SC205)
Dimensions and Description
.webp)
.webp)
Compact Combined Toilet & Shower Container
Unlike dedicated toilet-only or shower-only units, SC205 combines both sanitary functions within one purpose-built modular building.
Two private WC cubicles and two private shower cubicles are arranged around a shared internal circulation area, while two washbasins provide common handwashing and hygiene facilities.
Combined Toilet & Shower Layout
SC205 integrates toilet and shower functions within the same compact 4.00 × 2.40 m footprint.
The illustrated configuration includes two private WC cubicles, two private shower cubicles and two washbasins connected through a shared internal circulation area.
This arrangement is particularly practical for smaller teams or accommodation clusters where installing separate toilet and shower buildings would provide more capacity than required.
Two Private WC Cubicles
SC205 includes two enclosed toilet compartments, each provided with an individual access door to maintain privacy.
Toilet fixture type, cubicle dimensions, partition materials, accessories and internal finishes can be selected according to project requirements.
Two Private Shower Cubicles
Two dedicated shower compartments are integrated into the same sanitary building.
Each shower cubicle is separated from the common circulation area and can be supplied with shower fittings, drainage, waterproof interior finishes and sanitary accessories according to the selected specification.
Shower fittings and interior materials can be selected according to expected usage, destination conditions and project standards.
Two Shared Washbasins
Two washbasins are positioned within the common sanitary area for handwashing and general hygiene.
Washbasins can be supplied with faucets, mirrors and coordinated plumbing connections.
Soap dispensers, hand dryers, paper-towel holders and other hygiene accessories can also be added where required.
Compact 4.00 × 2.40 m Footprint
One of the main advantages of SC205 is its ability to combine multiple sanitary functions within a relatively small modular footprint.
The approximately 4.00 × 2.40 m building provides two toilets, two showers and two washbasins without requiring separate sanitary units.
This makes the model particularly suitable for compact construction sites, small accommodation areas, staff compounds and project locations where available space is restricted.
Building Configuration
| Model | SC205 |
|---|---|
| Product Type | Combined toilet and shower container |
| Overall Dimensions | Approximately 4.00 × 2.40 m |
| Building Configuration | Single storey |
| WC Cubicles | 2 private cubicles |
| Shower Cubicles | 2 private cubicles |
| Washbasins | 2 |
| Access | Single entrance with shared internal circulation |
Sanitary Facilities for Small Project Teams
SC205 is well suited to smaller project teams where a full-size sanitary block would provide significantly more capacity than required.
It can serve workers, engineers, supervisors or staff from nearby offices, accommodation units and operational areas.
On larger projects, several SC205 units can be positioned in different site zones to provide decentralized toilet and shower facilities closer to personnel.
Combined Sanitary Facilities for Workforce Accommodation
Within workforce accommodation projects, SC205 can be positioned close to dormitories or accommodation containers to provide both toilet and shower facilities within one building.
This can be particularly useful for smaller accommodation clusters, management zones or staff areas that do not require a large centralized sanitary building.
Multiple combined sanitary units can also be distributed throughout a larger camp where decentralized facilities are preferred.
Purpose-Built Modular Sanitary Construction
SC205 is designed specifically for sanitary use rather than being converted from a freight container.
This allows toilets, showers, washbasins, internal partitions, plumbing routes, drainage and ventilation systems to be coordinated during design and production.
Depending on project requirements, construction can include a galvanized steel structural frame, insulated sandwich-panel walls and roof, moisture-resistant flooring and durable sanitary interior finishes.
Plumbing & Drainage Systems
The internal plumbing system can be installed during factory production to reduce the amount of work required after delivery.
Toilet, shower and washbasin water-supply and drainage lines can be coordinated internally and connected to common external service points prepared for installation at the project location.
Wastewater connections can be adapted to municipal sewer systems, septic tanks, holding tanks or other site-specific infrastructure.
Hot-Water Provision for Showers
Shower operation may require a dedicated hot-water system depending on project specifications and local operating conditions.
Electric water heaters or other suitable systems can be integrated or connected according to expected usage, destination climate and available utilities.
Water-heating capacity can be selected according to anticipated shower demand and operational requirements.
Ventilation & Moisture Control
Proper ventilation is particularly important in combined toilet and shower buildings because both odor control and moisture management must be considered.
Mechanical extraction fans, natural ventilation openings or a combination of systems can be incorporated according to destination climate, expected usage and project requirements.
Electrical Systems
Electrical installations can be integrated during factory production.
Typical provisions can include internal lighting, switches, distribution equipment and power connections.
Additional electrical capacity can be included for extraction fans, water heaters, hand dryers, emergency lighting and exterior lighting.
Moisture-Resistant & Hygienic Interior Finishes
Because SC205 includes shower areas, interior materials should be selected for regular exposure to moisture and frequent cleaning.
Flooring, wall finishes and sanitary surfaces can be specified according to hygiene, water resistance, slip resistance, durability and maintenance requirements.
Shower zones can be detailed to support drainage and routine cleaning according to the selected project standard.
Customization Options
The illustrated SC205 configuration includes two WC cubicles, two shower cubicles and two washbasins, but the internal arrangement can be adapted according to project requirements.
Toilet and shower quantities, partitions, doors, washbasins, water-heating systems, plumbing, ventilation and electrical installations can all be customized.
Larger combined sanitary buildings can also include changing areas, urinals, accessible facilities and additional washing points.
Typical Applications
- Construction sites
- Workforce accommodation camps
- Staff accommodation areas
- Management accommodation zones
- Industrial facilities
- Infrastructure projects
- Mining operations
- Oil and gas projects
- Remote project locations
- Small temporary project compounds
Its compact combined layout makes SC205 particularly useful for smaller project populations and locations where both toilet and shower facilities are required within one building.
Combined Sanitary Facility for Project & Accommodation Compounds
SC205 can operate as an independent combined sanitary unit or be integrated into a larger workforce accommodation or project-site compound.
The unit can be positioned close to accommodation buildings, staff housing, site offices and other facilities that require nearby toilet and shower access.
Larger projects can combine several SC205 units with dedicated toilet, shower or changing facilities according to total workforce requirements.
Transportation & Installation
SC205 can be manufactured as a complete compact modular sanitary unit and transported to the project location.
Site installation typically includes positioning the building on prepared supports or foundations and connecting water supply, wastewater, electrical services and hot-water systems where required.
Utility connection positions can be coordinated during the design stage according to available site infrastructure.
Product Specifications
| Product | 2-WC & 2-Shower Modular Sanitary Container |
|---|---|
| Model | SC205 |
| Overall Dimensions | Approximately 4.00 × 2.40 m |
| Building Configuration | Single storey |
| WC Cubicles | 2 |
| Shower Cubicles | 2 |
| Washbasins | 2 |
| Structure | Galvanized steel modular frame |
| Walls & Roof | Insulated sandwich-panel system |
| Building Services | Water supply, drainage, electrical, ventilation and hot-water provisions |
| Typical Use | Construction sites, workforce accommodation and remote projects |
| Customization | Available according to project requirements |
SC205 Manufactured by Prefabex
SC205 is manufactured by Prefabex for construction, industrial, infrastructure and workforce accommodation projects requiring compact combined toilet and shower facilities.
The unit can be supplied independently or integrated with accommodation, office and dining facilities within a larger project compound.
Request an SC205 Project Proposal
Send us your project location, expected number of users, required toilet and shower capacity and available water, wastewater and electrical utilities to develop an SC205 sanitary configuration suited to your project.
Request a Project Proposal